Tools Required:

  • 15/16 wrench
  • 15/16 flat wrench
  • 7/16 wrench

To adjust an overly tight endstop, use a 7/16 wrench to ensure the nuts have enough room to pivot. Then, take your 15/16 wrench and 15/16 flat wrench and place them on the 5/8 nylock nut on the pivot shaft to ensure they can also pivot. There are two pivot shafts on both the left and right side of the stops. Adjusting the pivot shafts so that they are able to pivot will allow the stop to run smoothly.