Tools Required:

  • 1/8 allen wrench
  • 3/8 wrench
  • 7/16 wrench

With an 1/8 allen wrench and 3/8 wrench, loosen the shoulder bolt through the shock end and remove. Then with a 7/16 wrench, loosen quarter 28 nylock nut on shock clevis, then remove shock. Installing a new shock is just as easy. Slip shock clevis over the stud, replace nut, swing shock end into place, and replace shoulder bolt. Then replace the nuts. When tightening the nylock nuts, do not over tighten to eliminate travel with the stop.